Bitumen Products

Spramul SS-1h

Spramul SS-1h are slow-setting, anionic type of asphalt emulsions manufactured according to specifications of ASTM D977 – “Standard Specifications for Anionic Emulsified Asphalt.”

It is a dispersion of small droplets of penetration grade asphalt cement in water with the aid of an emulsifier. The size of the droplets is normally in the order of 1-20 microns, with some particles as big as 100 microns. Since these droplets are negatively charged, breaking (coalescence) is purely by evaporation of water.

Download: Spramul SS1h Technical Data Sheet

Spramul CSS-1h

Spramul CSS-1h are cationic type of asphalt emulsions manufactured according to specifications of ASTM D2397 – “Standard Specifications for Cationic Emulsified Asphalt.”

Download: Spramul CSS-1h Technical Data Sheet

Bitumen 60/70

Shell 60/70 Bitumen is a high-quality penetration grade bitumen used in road and airport construction and other similar applications

Download: Shell Bitumen 60/70 Technical Data Sheet

R1115 Bag

Shell Bitumen R-Grades are re-blown or oxidised bitumens which are produced by passing air through soft bitumen under controlled temperature conditions. This process alters the characteristics of the bitumen to give more ‘rubbery’ properties than for penetration and hard grades. Grades are specified by their mid-softening point and mid-penetration value, prefaced by the letter R.

MC 70

Shell Cutback MC-70 is a medium curing (MC) cutback asphalt consisting of penetration grade asphalt cement and diluent or ‘cutter’ of medium volatility. The diluent temporarily reduces the viscosity of the asphalt cement for ease of handling and application. After application the diluent evaporates, leaving the asphalt cement to perform its function.

Shell Cutback MC-70 conforms to the specifications of ASTM D2027 (Medium-Curing Asphalt) or AASHTO M82.

Download: MC 70 Technical Data Sheet

Flintkote Waterproofing

Flintkote PF 4

Flintkote PF-4 bitumen paint is a low viscosity blend of selected hard grade bitumen in solvent, which dries to form a high quality tough bitumen film. (Note: Flintkote PF-4 bitumen paint was formerly marketed under the brand name Shell PF-4 bitumen paint.)

Download: Flintkote PF4 Data Sheet

Flintkote Type 3

Flinthote3 bitunen emulsion is a single-pack, non-fibrated and stable wafer-borne emulsion which cures to form a firm and flexible bitumen waterproofing membrane. Flintkote 3 is designed for use on horizontal and vertical surface. Flintkote 3 is suitable for use as waferproof menbrane on concrete, asbestos cement, roofing felt, mastic asphalt, slates, tiles and metal surface.

Download: Flintkote Type 3 Data Sheet

Flintkote Type 5

Flintkote 5 bitumen emulsion is a single-pack, fibrated and stable water-borne emulsion which cures to form a firm and flexible bitumen waterproofing membrane. Flintkote 5 is designed for use on horizontal and vertical surface. Flintkote 5 is suitable for use as waterproof membrane on concrete, asbestos cement, roofing felt, mastic asphalt, slates, tiles and metal surface

Download: Filntkote Type 5 Data Sheet

Flintkote Decoralt – Colored Topping

Shell Flintkote Decoralt Blue is a synthetic resin based coating with a mineral filler use as decorative, protective, reflective non-skid surface treatment for use on concrete floor, brick work, mastic and over bituminous coatings on walls and roofs. It is not a vapor barrier and therefore permits breathing when applied over concrete, brick work and similar materials. Dry to a matt finish.

Download: Flintkote Decoralt – Colored Topping Data Sheet

Flintkote FG4 – Fiberglass Mesh

Flintkote FG4 is an open mesh woven glass fabric for the reinforcement of asphalt, bitumen mastic, bitumen emulsions and waterproofing coatings.

Download: Flintkote FG4 – Fiberglass Mesh Data Sheet

Flintkote Rustguard

Flintkote Rustguard is a solvent-based fibrated bituminous coating specially formulated to provide outstanding corrosive resistance to road water, salts, mud and outdoor weathering.